Project Description

Vacuum Cleaner Moving Simulation Tester

Vacuum-Cleaner-Moving-simulation-Tester11

Model: NO.VC-01
Loading Method:Dynamic Load
Display:Touch Screen LCD Display
Control:PLC
Power Source:AC220V
Transport Package:Wooden Box

separator

    Vacuum Cleaner Performance Ageing Test Machine

    Description:
    Labtek can manufacture wide range of test equipment for vacuum cleaner and sweeping robots. Including vacuum cleaner performance test equipment, friction force resistance test equipment, hose abrasion test equipment, vacuum cleaner moving simulation test machine, sweeping robot performance test equipment. Each of them can be customized from 1 set with competitive price.

    Application range

    LABTEK-Separator1
    Air-tightness-tester-air-leakage-test-family1113

    Vacuum cleaner motor aging test room

    LABTEK-Separator1
    Vacuum-Cleaner-aging-test-machine11

    Introduction:
    The door opening and closing life testing machine is mainly used for the door opening and closing durability test, to detect the quality reliability of the door body, and to test the opening / closing capacity of the cabinet door. The stepper motor is used as the driving source to drive the push rod to make reciprocating
    motion, so as to complete the reciprocating action of “opening and closing” the cabinet door. The PLC control action is used to open and close the cabinet door and simulate the action of opening and closing the door manually. It has strong universality, simple operation, convenient control and low failure rate.
    Technical characteristics:
    1.On-off time: 0-999999(units are S, M,H) adjustable;
    2.Count range: 0-9999999(H) adjustable;
    3.Electrical parameters display: current, voltage, power;
    4.Detection rate: 0.1S;
    5.Display mode: numerical expression;
    6.Working alarm: abnormal voltage, current, power, end of test;
    7.Related data record: electrical parameter value, running time;
    8.TControl mode: 7 “touch screen +mechanical instrument operation;
    9.Monitor: 7 “touch mode;
    10.Display mode: numerical display;
    11.Equipment power supply: AC0-380V / 50Hz/60Hz 5.5KW

    Vacuum Cleaner Aging Test Machine

    LABTEK-Separator1
    Vacuum-cleaner-motor-aging-test-room11

    Vacuum Cleaner aging test machine
    Introduction:
    The life test room of vacuum cleaner is suitable for the aging life and performance test of household appliance vacuum cleaner. This paper mainly focuses on the performance test and long-term aging life test of AC and DC vacuum cleaners. The whole test room is composed of test room body, aging test bench, central control system, independent room in suction area, exhaust system, aging system, etc. The whole test and related monitoring inside the test room is controlled by the central control system in real-time and on-site environmental monitoring.
    Technical characteristics:
    1. Station: 2-20 stations
    2. Machine reference overall dimensions: length 150cm x width 120cm x height 120cm.
    3. Overall maximum test sample size: 75x75cm
    4. Voltage regulation range of the whole machine: 0-300V adjustable, DC 0-36v adjustable
    5. Control power supply: the working voltage of the equipment console is 220 V AC, and the working voltage of the equipment and the sample load voltage are supplied independently without mutual interference;
    6. Each station is equipped with an outlet pipe to the suction chamber. The orifice plates are 10 mm, 13 mm, 15 mm, 16 mm, 19 mm, 0.5 inch, 0.375 inch, 0.25 inch, 0.125 inch. The material is 2mm thick stainless steel plate,
    7. Control mode: PLC industrial computer
    8. Power supply: 220 V 3.5 kw

    Vacuum Cleaner Performance Test Machine

    LABTEK-Separator1
    Vacuum-Cleaner-impact-air-performance-test-machine11

    Introduction:
    Dry vacuum cleaner energy efficiency testing equipment is based on the relevant standards and customer requirements. It is designed according to IEC60312 standard, mainly for dry vacuum cleaner performance test. The test equipment uses industrial computer and 17 inch display to automatically calculate the test items, collect data automatically, record data, and export and print relevant test contents through USB
    Technical characteristics:
    1. Test station: single station
    2. Test bench size: 3000 × 2000mm; equalizing box size: 500x500x500 unit: mm
    3. Effective travel of test bench: 5-20 times / min
    4. Test speed: 0-1.5m/s
    5. Applicable floor: hard floor, carpet, pine board
    6. Control mode: IPC + PLC test system: win10
    7. Equipment power supply: 220 V 8.5 kw
    8. According to the requirements of American Standard and European    standard, American standard is rotary orifice plate. The dimensions      of  orifice plate series (mm): 63.5, 57.2, 50.8, 44.5, 38.1, 34.9, 31.7, 28.6, 25.4, 22.2, 19.0, 15.8, 12.7, 9.5 and 6.3
    9. Central control cabinet size: 800x600x1650mm (L / w / h)

    Vacuum Cleaner Moving Simulation Test Machine

    LABTEK-Separator1
    Vacuum-Cleaner-Moving-simulation-Tester11

    Vacuum Cleaner moving test machin
    Introduction:
    It is mainly applicable to the life aging test of vacuum cleaner. During the test, the actual ground walking condition of the vacuum cleaner is simulated, and the carpet is laid on the test table to make the vacuum cleaner move reciprocally on the test bench. Through the transmission mechanism to set a good speed in different working plane for reciprocating linear motion. PLC controls 7-inch touch screen to display relevant detection parameters. Relevant test data are exported through USB. It has strong versatility, simple operation, convenient control and low failure rate
    Technical characteristics:
    1. Test station: 2-10 stations
    2. Test bed size: 1500 × 600mm;
    3. The effective travel distance of the test bench: 100-1200mm adjustable;
    4. Test fixture moving speed: 450-600mm / s, can be set;
    5. Electrical parameters: current, voltage, power
    6. Cycle: 0-99999 adjustable;
    7. Counting range: 0-9999;
    8. Test mode: time on / off setting
    9. Drive mode: servo motor reciprocating drive mechanism.
    10. Equipment power supply: 220 V 3.5 kw

    Vacuum Cleaner Friction Force Resistance Test Machine

    LABTEK-Separator1
    Vacuum-Cleaner-Friction-Force-Resistance-test-machine11

    Introduction:
    The motion resistance testing machine of vacuum cleaner is suitable for simulating the friction force produced by the cleaning head in the process of moving forward and backward. The testing machine adopts PLC and touch screen control system, Through PLC program control, reciprocating linkage operation and program cycle action and resistance value record are carried out. Relevant test data can be exported through USB
    Technical characteristics:
    1. Test station: single station
    2. Test bed size: 1200 × 600mm;
    3. The effective travel distance of the test bench: 100-1000mm adjustable;
    4. Test fixture moving speed: 100-600mm / s, adjustable;
    5. Control mode: PLC
    6. Cycle: 0-99999 adjustable;
    7. Counting range: 0-9999;
    8. Test mode: test times / time on / off setting
    9. Force range: 0-200n, test accuracy 0.5N
    10. Equipment power supply: 220 V 3.5 kw
    11. Equipment size: 2000x650x1650 unit mm

    Sweeping Robot Life-time Test Machine

    LABTEK-Separator1
    Sweeping-robot-life-test-machine11

    Sweeping Robot Life-time Test Machine
    Introduction:
    1. The size of the robot life test frame is 1.8m high × 1.5m wide × 1.5m long, which is placed in three layers
    2. Three stations can operate independently;
    3. Test floor: marble tile, solid wood floor, short Wool ASTM level loop carpet, 20 mm smooth pine board
    4. Each layer of test device is equipped with a 4cm high protective fence around the surface, which should have enough strength to meet the impact of the robot during operation
    5. Three robots on each device are powered by DC power
    6. Through a PLC control system to control, for the control system and display
    Technical characteristics:
    1. Test station: 3 stations 2. Test bed size: 1500 × 1500mm; 3. Power supply voltage: 0-36v (DC) 4. Detection mode: current, voltage and power 5. Equipment power supply: 220 V 3.5 kw 6. Equipment size: 2000x1550x1650 unit mm

    Vacuum Cleaner Charge and Discharge Life-time Test Machine

    LABTEK-Separator1
    Vacuum-Cleaner-Charge-Discharge-life-time-test-machine

    Vacuum Cleaner charge and discharge life test machine
    Introduction:
    The vacuum cleaner charge discharge life testing machine is used to monitor the changes of voltage, current and power consumed by charging products, and record the charging time and times. The testing machine adopts profile structure, and each set of equipment has 12 independent operation stations. Two electric parameter tables are placed under the universal socket of each station to measure the electrical parameters of charging products; the automatic suspension of test end and fault alarm can realize unattended automatic aging, which can greatly improve the work efficiency, reduce the hidden danger of test operation, and improve the detection speed and data accuracy.
    Technical characteristics:
    1. Equipment station: 12 stations
    2. Touch screen: 7-inch color touch screen, 1,
    3. PLC: Mitsubishi, Japan, data outage memory function;
    4. Voltage: 0-300V adjustable
    5. Time setting range: 1-99999 H / min / S
    6. Overall dimension of test equipment: about 1250x750x1250 (height) mm
    7. Equipment power supply: 220 V 1.5 kW
    8. Equipment size: 1650x1200x1650 unit mm

    Vacuum Cleaner Hose Twist Test Machine

    LABTEK-Separator1
    Vacuum-Cleaner-hose-twist-test-machine11

    Vacuum Cleaner hose twist test machine
    Introduction:
    The hose twist tester is designed and manufactured to meet the requirements of article 21.104 in GB4706.7-2008, GB4706.61-2008, and IEC60335-2-2 and IEC60335-2-54 standards. During the test, the horizontal axis of the hose is fixed on the equipment, and the horizontal rotation axis is rotated forward for 5 turns, and then reversed for 5 turns. The cycle test is 2500 times. After the test, the sample is electrically tested Strength test.
    Compliance criteria:
    It meets the requirements of article 21.104 in gb4706.7-2008 and gb4706.61-2008, and iec60335-2-2 and iec60335-2-54 standards.

    Technical characteristics:
    1. Rotation rate of free end: 10R / min;
    2. Rotation angle: 5 cycles of forward rotation and 5 cycles of reverse rotation are 1 cycle;
    3. Test station: single station;
    4. Test times: 0-999999 (preset);
    5. Sample clamping mode: the current carrying hose is horizontally clamped and the other end is freely suspended;
    6. Working power supply: AC220V 2.0kw
    7. Dimensions: (WxDxH) 800mmx650mm x1650mm

    Vacuum Cleaner Cable Service Life  Test Machine

    LABTEK-Separator1
    Vacuum-Cleaner-hose-abrasion-test-machine11

    Vacuum Cleaner cable service life  test machine

    Introduction:

    Meet the requirements of IEC60335.1 and B4706.122.16 Through the PLC control action, the wire drawing life test of vacuum cleaner with take-up is carried out To simulate the manual pulling and closing action of the take-up device. It has strong versatility, simple operation, convenient control and low failure rate.

    Technical characteristics:
    1. Cable travel: (0 ~ 1000) mm adjustable
    2. Pulling speed: (0 ~ 1000) mm / s adjustable
    3. Pay off rate: (0 ~ 1000) mm / s adjustable
    4. Support arm inclination: (40-90) ° (adjustable)
    5. Control mode: PLC Mitsubishi, Japan
    6. Counting / timing: 999999 (preset)
    7. Starting mode: servo step
    8. Overall dimension of test equipment: about 1200x2000x14500 (height) mm
    9. Equipment power supply: 220 V 4.5 kw

    Vacuum Cleaner Hse Abrasion Test Machine

    LABTEK-Separator1
    Vacuum-Cleaner-hose-abrasion-test-machine11

    Vacuum Cleaner hose abrasion test machine
    Introduction:
    1. Meet GB4706.7-2008, GB4706.61-2008 standard clause 21.102, figure 101
    2.Specifications and requirements of IEC60335-2-2 and IEC60335-2-54 standards. Relevant parameter requirements.
    3. Crank speed: 30rpm (the speed can be adjusted in the control box). 4. Moving distance of hose: 300 mm.
    5. Sand belt moving speed: 0.1m/mm (the speed can be adjusted in the control box).
    6. Sand belt: the size required by ISO / DIS 6344 is P100.
    7. Weight: 1kg.
    8. Distance between weight and roller center: 600mm.
    9. When installing, pull out the supporting plate, put the weight on the supporting plate, and then connect with the sample, and the side weight and roller The center distance is just 600 mm.
    10. Counting times: 0-99999 (settable)
    11. Control mode: touch screen control
    12. Test station: three stations (linkage)
    13. Overall dimension: about (WxDxH) 1350mmx600mmx1600mm.

    Warranty from manufacturer

    LABTEK-Separator1
    Air-Tightness-Tester-Family5555

    Warranty:

    Hardware: 24 months hardware warranty

    Software: Update online lifetime (Free)

    Successful cases

    LABTEK-Separator1
    Air-tightness-tester-air-leakage-test-family1118
    Air-tightness-tester-air-leakage-test-family1119
    Air-tightness-tester-air-leakage-test-family11110